Armstrong Pumps E Series Single Phase Circulating Pump - 2/5 H.P., 120V, 4.8 Amp, 60 Hz., 3300 RPM
E.2 Series circulators are designed for use in a wide range of hydronic applications, including:
• Hot & chilled water recirculation
• Domestic hot water generation
• Snow-melt installations
• Radiant heating systems
• Geothermal heat pumps
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
larger, stainless steel shaft, new sealed, permanently lubricated bearings, bellows-style mechanical seal with silicon carbide wear surfaces, new water slinger to protect motor against water intrusion.
Features:
• Less flanges
• EPDM gasket
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal
• 30% Glass-filled Noryl impeller
• Stainless steel face plate and shaft
• Can be used with 3/4” to 2” flanges
• Weights range from 11.5 to 20.1 lbs
• Permanently lubricated stainless steel bearings
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt
• “B” At the end of the part number indicates bronze pump, otherwise pumps are bronze fitted
• For California Residents please see Prop 65 Warnings
• Hot & chilled water recirculation
• Domestic hot water generation
• Snow-melt installations
• Radiant heating systems
• Geothermal heat pumps
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
larger, stainless steel shaft, new sealed, permanently lubricated bearings, bellows-style mechanical seal with silicon carbide wear surfaces, new water slinger to protect motor against water intrusion.
Features:
• Less flanges
• EPDM gasket
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal
• 30% Glass-filled Noryl impeller
• Stainless steel face plate and shaft
• Can be used with 3/4” to 2” flanges
• Weights range from 11.5 to 20.1 lbs
• Permanently lubricated stainless steel bearings
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt
• “B” At the end of the part number indicates bronze pump, otherwise pumps are bronze fitted
• For California Residents please see Prop 65 Warnings
| Manufacture Item Number | 182212-841 |
| UPC | 672807409999 |
| Weight | 19.8 |
| Package Quantity | EACH |
| A (in) | 6-3/8 |
| B (in) | 8-1/2 |
| C (in) | 3-5/8 |
| Amp | 4.8 |
| H.P. | 2/5 |
| RPM | 3300 |
Details
E.2 Series circulators are designed for use in a wide range of hydronic applications, including:
• Hot & chilled water recirculation
• Domestic hot water generation
• Snow-melt installations
• Radiant heating systems
• Geothermal heat pumps
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
larger, stainless steel shaft, new sealed, permanently lubricated bearings, bellows-style mechanical seal with silicon carbide wear surfaces, new water slinger to protect motor against water intrusion.
Features:
• Less flanges
• EPDM gasket
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal
• 30% Glass-filled Noryl impeller
• Stainless steel face plate and shaft
• Can be used with 3/4” to 2” flanges
• Weights range from 11.5 to 20.1 lbs
• Permanently lubricated stainless steel bearings
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt
• “B” At the end of the part number indicates bronze pump, otherwise pumps are bronze fitted
• For California Residents please see Prop 65 Warnings
• Hot & chilled water recirculation
• Domestic hot water generation
• Snow-melt installations
• Radiant heating systems
• Geothermal heat pumps
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
larger, stainless steel shaft, new sealed, permanently lubricated bearings, bellows-style mechanical seal with silicon carbide wear surfaces, new water slinger to protect motor against water intrusion.
Features:
• Less flanges
• EPDM gasket
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal
• 30% Glass-filled Noryl impeller
• Stainless steel face plate and shaft
• Can be used with 3/4” to 2” flanges
• Weights range from 11.5 to 20.1 lbs
• Permanently lubricated stainless steel bearings
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt
• “B” At the end of the part number indicates bronze pump, otherwise pumps are bronze fitted
• For California Residents please see Prop 65 Warnings