General Wire Spring Mini-Rooter™ Electric Drain Cleaner
This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.
The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
• Clears 1-1/4″ to 3″ lines and most 4″ lines.
• Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®.
• Built in 6” wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
• Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility. Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. It’s so tough, it has a one year warranty against defect or breakage.
• Made in U.S.A.
• The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck.
• Built-in Dolly.
• Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.
• MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades.
• 43 lbs. (19.5 kg) without cable.
• Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) (51 cm x 41 cm x 96 cm – 51 cm).
• Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
• Belt Guard: High impact plastic
• Motor: 1/3 HP, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
• Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
• Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
• Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
• Does not include the cable and cutters.
• Freight charges apply.
• For California Residents please see Prop 65 Warnings
The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
• Clears 1-1/4″ to 3″ lines and most 4″ lines.
• Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®.
• Built in 6” wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
• Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility. Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. It’s so tough, it has a one year warranty against defect or breakage.
• Made in U.S.A.
• The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck.
• Built-in Dolly.
• Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.
• MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades.
• 43 lbs. (19.5 kg) without cable.
• Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) (51 cm x 41 cm x 96 cm – 51 cm).
• Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
• Belt Guard: High impact plastic
• Motor: 1/3 HP, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
• Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
• Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
• Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
• Does not include the cable and cutters.
• Freight charges apply.
• For California Residents please see Prop 65 Warnings
| Manufacture Item Number | MRP |
| UPC | 093122112805 |
| Weight | 43 |
| Package Quantity | EACH |
| Wgt. (lbs) | 37 |
Details
This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.
The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
• Clears 1-1/4″ to 3″ lines and most 4″ lines.
• Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®.
• Built in 6” wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
• Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility. Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. It’s so tough, it has a one year warranty against defect or breakage.
• Made in U.S.A.
• The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck.
• Built-in Dolly.
• Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.
• MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades.
• 43 lbs. (19.5 kg) without cable.
• Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) (51 cm x 41 cm x 96 cm – 51 cm).
• Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
• Belt Guard: High impact plastic
• Motor: 1/3 HP, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
• Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
• Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
• Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
• Does not include the cable and cutters.
• Freight charges apply.
• For California Residents please see Prop 65 Warnings
The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
• Clears 1-1/4″ to 3″ lines and most 4″ lines.
• Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®.
• Built in 6” wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
• Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility. Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. It’s so tough, it has a one year warranty against defect or breakage.
• Made in U.S.A.
• The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck.
• Built-in Dolly.
• Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.
• MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades.
• 43 lbs. (19.5 kg) without cable.
• Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) (51 cm x 41 cm x 96 cm – 51 cm).
• Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
• Belt Guard: High impact plastic
• Motor: 1/3 HP, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
• Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
• Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
• Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
• Does not include the cable and cutters.
• Freight charges apply.
• For California Residents please see Prop 65 Warnings